Bitte poste die SMART-Werte Deiner Festplatte für mich zum Kaffeesatzlesen. SMARTReporter Tryout besorgen (
http://www.corecode.at/smartreporter/, das Tryout kostet kein Geld), starten, dann auf Überprüfungen, S.M.A.R.T., dann auf Fortgeschrittene Werkzeuge, dann "Attribute zeigen" in der Zeile Deiner Systemfestplatte (Du solltest lt. Deiner Angaben ja nur eine Festplatte verbunden haben). Die dann Copy&Paste hier rein. Falls Du die smartmontools (Terminal) installiert hast, so geht es auch damit (einfacher: smartctl -a disk0).
/Users/tarekel-ela/Downloads/SMARTReporter.app/Contents/Resources/smartctl --tolerance=permissive --smart=on -a disk0
smartctl 6.3 2014-07-26 r3976 [x86_64-apple-darwin14.0.0] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..55GSX
Device Model: TOSHIBA MK3255GSXF
Serial Number: 89JQT3QYT
LU WWN Device Id: 5 000039 1f1c87892
Firmware Version: FH115B
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Sat Jul 25 17:14:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 114) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1703
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 8595
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 9407
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7119
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 7146
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 1229
193 Load_Cycle_Count 0x0032 031 031 000 Old_age Always - 690303
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 41 (Min/Max 14/46)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 76
222 Loaded_Hours 0x0032 084 084 000 Old_age Always - 6772
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 267
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 1059
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 90% 201 -
# 2 Short offline Aborted by host 90% 201 -
# 3 Short offline Aborted by host 90% 196 -
# 4 Short offline Aborted by host 90% 194 -
# 5 Short offline Aborted by host 90% 178 -
# 6 Short offline Aborted by host 90% 178 -
# 7 Short offline Aborted by host 90% 174 -
# 8 Short offline Aborted by host 90% 172 -
# 9 Short offline Aborted by host 90% 169 -
#10 Short offline Aborted by host 90% 168 -
#11 Short offline Aborted by host 90% 167 -
#12 Short offline Aborted by host 90% 166 -
#13 Short offline Aborted by host 90% 149 -
#14 Short offline Aborted by host 90% 145 -
#15 Short offline Aborted by host 90% 144 -
#16 Short offline Aborted by host 90% 140 -
#17 Short offline Aborted by host 90% 139 -
#18 Short offline Aborted by host 90% 136 -
#19 Short offline Aborted by host 90% 117 -
#20 Short offline Aborted by host 90% 115 -
#21 Short offline Aborted by host 90% 109 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.